New firmwares will be added to this page as they're released. To submit bug reports and features requests, please submit a ticket on this portal.
Latest stable | n/a |
Latest beta | v1.12.2, beta-4 |
Version 1.12.2 (beta-4)
This is a service release targeting the new model TNA-303L-65. beta-4 is expected to be the final beta and will be promoted to stable in August or September.
Changes (TNA-303L-X-beta-4, rev 7663) 7/28/25:
- Fixed the ethernet link status LED.
- Fixed a bug related to PTP mode (see known issue #5 below).
- Other misc improvements.
Changes (TNA-303L-X-beta-3, rev 7620) 7/8/25:
- Internal speedtest results are now accurate in both TX and RX directions.
- A bug has been fixed which prevented network settings from taking affect when changing from DHCP static to client mode, without changing any other settings.
- Fixed the site survey and temp channel change actions on the 303L.
- Fixed a web UI issue where a missing or misconfigured 60GHz radio caused the dashboard to show a system/internal error.
Changes (TNA-303L-X-beta-2, rev 7613) 6/24/25:
- Added support for the 2.4GHz Mediatek MT7610U USB Wi-Fi dongle for device management. Once inserted, the 2.4GHz radio will come up with an SSID of tachyon-mgmt<last 3 octets of eth0 mac> and can be access with the passphrase 00000000 at 192.168.5.1. Any clients will get a DHCP address within the 192.168.5.x range.
- Added significant throughput increases when data VLAN is enabled. Non-data VLAN modes are also accelerated.
Known issues (TNA-303L-X):
- Internal speed test results are not currently accurate on the 303L-65. [Fixed in beta-3]
- Site survey and temp channel change are currently not working for the 303L-65. [Fixed in beta-3]
- Traffic control limits for the 303L-65 no longer function. [Present in beta-2 and later]
- Ethernet status LED is not currently functioning on the 303L-65. This will be addressed in the final firmware release. [Fixed in beta-4]
- PTP slave mode is not being set correctly internally. A client configured as PTP slave will still connect to a PTP master, but it will not be optimized. This will be addressed in the final firmware release. [Fixed in beta-4]